Skip to main content

Vident iEasy300 and iEasy300Pro: How to enter the update mode?

This post will guide you how to enter the update mode of Vident iEasy300 and iEasy300Pro.

1. Vident iEasy300

Step 1. Press and hold I/M Key.

vident-ieasy300-01

Step 2. Do not release the I/M Key and connect the USB cable

vident-ieasy300-02

2. Vident iEasy300Pro
vident-ieasy300pro-eobd-obdii-code-reader-videntshop-6

Step 1. Press and hold ? Key

vident-ieasy300-pro-01

Step 2. Do not release the ? Key and connect the USB cable

vident-ieasy300-pro-02

www.videntshop.com
Labels:

Comments

Post a Comment

Popular posts from this blog

Vident iLink & iAuto Series Scanners Problems and Solutions

For Vident iLink series scanners (e.g iLink400 , iLink410, iLink440, and iLink450) and iAuto series scanners (e.g iAuto700 , iAuto702 Pro ), all need to register, update software and change language. It’s required to use the TF card, card reader and Windows operation system to complete. Here share the common problems and offer the corresponding solutions. 1. Problem: The user doesn’t know where the TF card is, how the TF card is connected to the computer through the card reader, or the user confirms that the connection has been made but cannot see the serial number (and thus cannot be upgraded). Videntshop.com engineer replied: 1). The TF card is on the left of the PUSH EJECT position. 2). Take out the TF card (PUSH and EJECT) from the scan tool, and insert it to the computer via card reader incorrect way. 3). It’s important that you need to register your scan tool (iLink series, iAuto series) at first before using it for the first time. -Install update client iScanzilla ...
Post a Comment
Read more

How to use Vident Ilink 400 to Perform Auto Scan and Control Unit Selection?

This article shows you a guide on how to use Vident ilink 400 to perform Auto Scan and Control Unit Selection. Menu options typically are: ● Auto Scan: performs an automatic system test to determine which control modules are installed on the vehicle and obtain diagnostic trouble codes (DTCs) overview. ● Control Unit: Control Unit screen displays all controllers available to this specific vehicle manufacturer. Steps: Auto Scan 1. Select Auto Scan from the menu and press OK to start. 2. When the auto scan finishes, a menu with a list of installed controllers together with the DTC overview displays. 3. If there is diagnostic trouble codes detected in a control unit, press the function key corresponding with Display DTC on the screen to view details of code information, and press the function key Quick Erase to clear them. 4. Select the system you want to test, press ”OK”. When the scan tool has connected with the vehicle, the Function Menu displays. Control Unit ...
Post a Comment
Read more

Vident ilink400 manual: Functions, Reviews, software download & update

Vident ilink400 is a cost-effective scan tool, powerful functions, wide-coverage, support for multiple languages, free upgrade within three years... In this post, you can find out more details about Vident ilink400: functions, reviews, updates, etc. Part 1. ilink400 Functions: Note: Not all function options listed above are applicable to all vehicles. Available options may vary by the year, model, and make of the test vehicle. If you want to know whether ilink400 supports your car or not, please feel free to contact us sales@VidentShop.com 1. Diagnosis functions: Basic diagnosis Read Code Clear Code Freeze Frame Data(FFD) System information Live data Other diagnoses Active Test Adaptation Coding 2. Common Special Service/Functions: Oil Light Service/Reset EPB (Electronic Parking Brake) BRT (Battery Configuration) DPF (Regeneration of Diesel Particulate Filter) TBA/TPS (Throttle Body Alignment) Injector Coding TPMS (Tire Pressure Measuring Sensor Reset) S...
Post a Comment
Read more